Documentation Index
Setting up Alcatel SpeedTouch USB DSL Modem
/etc/hotplug/usb/speedtouch
Add one 0x0000 in the file /etc/hotplug/usb.usermap:
Before:
speedtouch 0x0003 0x06b9 0x4061 0x0000 0x00 0x00 0x00 0x00 0x00 0x00
0x00000000 "Alcatel SpeedTouch USB"
After:
speedtouch 0x0003 0x06b9 0x4061 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00
0x00 0x00000000 "Alcatel SpeedTouch USB"
Restart the hotplug service with the command "rchotplug restart".
Start YaST2 and open the module Network/Basic -> DSL Configuration. You
will be asked if T-Online is your provider, answer 'No'. In the next
dialog, enter user name, password, VPI/VCI numbers (e.g., 0.38 for British
Telecom), and switch the 'PPP mode' to 'PPP over ATM'.
Tipp: You can get the VPI/VCI numbers with the Windows Alcatel Tool or by
asking your provider.
Documentation Index
|
